CCM - Brick & Tile Floors, Setting Beds, Grouts & Mortars
BRICK & TILE FLOORS

The Atlas VTF System uses vitrified tile to offer optimal aesthetics, uniformity, and durability while providing a broad range of chemical resistance. Vitrified tiling combines high compression strength and low absorption with immunity to impact and thermal shock.

• Tiles are placed in Atlas VTF Setting Bed with joint widths as narrow as 5/64″ to 1/8″ (2mm to 3mm) 

• Joint width is achieved by proper placement of straight edge or self-spacing tile 

• Tile is power-grouted to provide smooth, consistent jointing throughout the floor. 

• ANSI 108.6 Compliant 

The finished floor is chemically resistant to food and its byproducts as well as aggressive CIP and other cleaning compounds. Its antimicrobial design and ease of cleanability produce a sanitary floor for many years of service.

Used by the food, beverage pharmaceutical and electronic industries for over 60 years for chemical and thermal resistance in combination with sanitary regulations and esthetics.

• Direct bond system 

• Masonry brick, tile or pavers are bonded to the substrate with Red Furnane Setting Bed (Tile to be ANSI 137.1 Compliant) 

• An Atlas Grout or Mortar is used to fill the joints 

• The system can be installed using either the Tilesetter’s Method or the Bricklayers’s Method 

• ANSI 108.6 Compliant

Offer outstanding resistance to aggressive chemical, vehicular traffic, impact and abrasive environments for floors, trenches, sumps and pits throughout chemical process, storage, containment and unloading areas.

• Heavy duty, aggressive environments 

• Impervious Membrane provides a secondary barrier to prevent liquid penetration to the substrate

• Chemical Resistant Mortar Setting Bed and Joints 

• Chemical Resistant Brick